Get Threads magazine!

Give a Gift

Choose the Right Serger Stitch for Your Project

Even the most basic serger can produce several stitches. Here’s a look at the whole family of stitches and the best use for each.
Match stitch width to the fabric used.
The two-thread overedge stitch is just one of the many options.
Even the most basic serger can produce several stitches. Here’s a look at the whole family of stitches and the best use for each.

Even the most basic serger can produce several stitches. Here’s a look at the whole family of stitches and the best use for each.

Photo: Sloan Howard

Serged stitches add stretch and strength to seams, simplify edge-finishes, and even embellish a garment. But there are so many stitches to choose from, it's hard to know which stitch to use on which fabric or when not to serge at all. Some of these questions can be answered by learning the standard serger stitches and their attributes.

Be aware that not all sergers can make every stitch, so check the machine's manual to see what it can do. And if you're shopping for a new serger, make sure the model you choose has the stitches you want.

sergers More on sergers

• 6 Serger Secrets
• 4 Serging Techniques
• Video: How to Serge Seam Allowances

To serge or not to serge

To decide whether to use your serger instead of a conventional machine, it's important first to understand the difference in these two types of stitches: On a serger, the looper threads are looped and interlaced-in effect, knitted-with the needle thread(s); on a standard machine, the bobbin thread locks with the needle thread. 

Next think about your fabric, how you'll use it, and how often you'll wash it. Will it be a knit you'll wash frequently? A woven destined for sportswear and a one-season life span? Or a sheer, crinkled fabric for a loose-fitting garment? In all these cases, the serger is the way to go for seaming and edge-finishing. But if you're making a straight wool skirt or a linen blazer, serging the seams will yield bulky lines rather than the smoothness of pressed-open seams. And if you plan to line your garment, finishing edges with the serger is a waste of thread because all seams will be enclosed.

Selecting a serger stitch

When you do opt for a serged seam or edge-finish, choose the stitch that matches the needs of your garment. Keep in mind that a serger stitch with fewer threads can have a lot of strength and stretch. Stitches with more threads tend to be bulkier rather than stronger, though there are exceptions, like the superstretch, three-thread wrapped stitch. And stitches incorporating the chainstitch make a stable, nonstretchy seam.

As a rule, use a narrow stitch with fewer threads for lightweight fabrics, wrapped stitches for maximum stretch on knit seams, overlock stitches for standard seams on knits and wovens, and wider overlock stitches with the most threads for ravelly or bulky fabrics. Flatlock stitches are wonderful for sportswear that needs to be comfy on the inside, and rolled-hem stitches finish delicate sheers beautifully. Thread tensions may need adjustment depending on the particular fabric and for flatlock and wrapped stitches.

To reduce the bulkiness of serged seams that use a lot of thread, use a long stitch length. Be sure to experiment with stitch length on a sample first. If the stitches are too far apart, the resulting seam may not be strong enough, especially on loosely woven fabrics. 

On many machines, for two- and three-thread stitches, you can choose between using the left needle for a wide stitch, the right for a narrow stitch, or using the machine's rolled-hem function to produce a very narrow stitch (see the photo at left). And don't forget embellishment: Take advantage of the fact that a serger's loopers don't pierce the fabric, meaning you can use heavier, decorative thread in one or both loopers to turn a seam or edge-finish into a design element.

The names of the stitches may be confusing at first, and may vary slightly from manual to manual, but all relate to how the stitches are formed. Two-thread stitches are generally called overedge, or overcast, because the threads don't interlace at the needle. Three-, four-, and five- thread stitches are referred to as overlocked because the needle thread interlaces with the loopers to form a knot at the needle line. And when the looper thread completely encircles the edge of the fabric on some two- and three-thread stitches, the stitches are called wrapped.

Once you become familiar with the wide variety of stitches offered on sergers, you'll develop a sense of when to use a stitch. Then use them often so your garments will look better and last longer. Here are just a few of your options.

1 | 2 > View all

Comments (5)

SteveGolden SteveGolden writes: Good! thanks
Posted: 9:57 am on March 8th

Foxtrot401 Foxtrot401 writes: Unless and incomplete article.
Posted: 3:53 pm on August 4th

EdwardJenkins EdwardJenkins writes: Congratulations ! Great work
Posted: 2:01 am on July 31st

sewhidbey sewhidbey writes: Good basic information on when to use each stitch and clear graphics. Thanks.
Posted: 5:00 am on November 25th

scrubble4 scrubble4 writes: Thank you for the clarity of the instructions and the diagrams. I love diagrams that are color coded. Makes things so easy to understand.
Posted: 11:57 pm on August 3rd

Log in or create a free account to post a comment.