More Fortuny! Yes, More!
Cutting this fabric presents a small challenge, though. The fabric itself is a cotton twill, which is somewhat lightweight. I've decided to interline it with a blue twill of similar weight. My customer doesn't want a jacket that is too constructed, but not like a shirt either.
|As you can see in this photo, when tearing the fabric to get the grain, the printing is off grain. There is a judgment call to make here--cut on grain, or cut on pattern.
Since the paints Fortuny uses in the printing process are thick, they tend to "lock" the grain of the fabric, so I've decided to cut on pattern. This will mean the fabric is a little off-grain, but with the printing being an all-over pattern, this won't present a problem.
|All the markings are on the interlining, and I've decided to baste in the seam allowances. The metallic paints tend to show pinholes slightly, so I don't want to mar the fabric with basting outside the seam lines.
You can see stitching lines marked in tracing carbon, and thread basting to hold the layers together.