Facebook Email Pinterest Twitter Instagram Tiktok Icon YouTube Icon Headphones Icon Favorite Navigation Search Icon Forum Search Icon Main Search Icon Close Icon Video Play Icon Indicator Arrow Icon Close Icon Hamburger/Search Icon Plus Icon Arrow Down Icon Video Guide Icon Article Guide Icon Modal Close Icon Guide Search Icon
How-to

How to Make a Fortuny Gladstone Bag, Part 2

In Part 1 of my Fortuny Gladstone bag series, I walked through how to deconstruct an old Gladstone bag. I also showed you how I created the new bag body out of Fortuny fabric. In Part 2, I show how I constructed the end gussets and attached them to the bag body.
make a fortuny gladstone bag part 2

The gusset was cut in two pieces–an upper and a lower half–and seamed together. Notice that I used binder clips instead of pins to hold them for sewing.

make a fortuny gladstone bag part 2

Here’s the completed gusset, ready for the seams to be pressed open.

On a leather like this, glue the seam allowances open with contact cement.

I spread the cement over the seam but not to the cut edge of the seam allowance.
make a fortuny gladstone bag part 2

If you apply the cement to the edge of the seam allowance, when you press it open, the cut edge will read through to the right side.

make a fortuny gladstone bag part 2

After the cement dried and set, I pressed the seam allowance open. I hammered the seam allowance flat on a wooden seam roll.

Notches were needed at the top edge of the bag to accommodate the frame. I made the notches before attaching the gussets to the completed bag body.

In leather, this was easy to do, as there was no worry about raveling fabric. I simply cut the notches when cutting the upper gusset pieces.
make a fortuny gladstone bag part 2

On the fabric-covered bag sides, though, I made a finished edge at the notched areas by peeling the canvas (black) away from the fabric and drawing the shape of the notch onto the canvas back.

make a fortuny gladstone bag part 2

I cut the shape from the canvas and pressed the Fortuny fabric back against the canvas. Fusible web was applied to secure the seam allowances.

Next, I cut a 1-inch-wide strip of leather and sewed it to the side and bottom edges of each gusset. To install each gusset, I glued first the base, secured it to the base with binder clips, and let it set.
make a fortuny gladstone bag part 2
Tip: Use leather scraps between the fabric and binder clips, so the clips don’t mar the fabric and leather.

Here is the bag, with two sides of the gusset glued, and the third side clipped while the glue set.
make a fortuny gladstone bag part 2

It’s easier to manage this when you glue and allow the sides to set one by one, rather than trying to attach them all at the same time.

The next step was to sew the leather strips to the edges of the body, joining the gussets to the body.
make a fortuny gladstone bag part 2

Afterward, the chipboard for the lower portion of the gussets was adhered with contact cement. In this view, the gusset is at the bottom of the photo; the chipboard is in position.

make a fortuny gladstone bag part 2

The body of the bag was ready for the lining. The fabric-covered sides came together at the top, where the frame was to be installed. The upper half of each gusset was pleated inward, while the bottom half held its shape due to the chipboard backing.

Continue to the big finish in part 3.

Leave a comment: Have you ever undertaken a bag project such as this? If not, would you consider taking it on?

Discuss

Threads Insider

Get instant access to hundreds of videos, tutorials, projects, and more.

Start Your Free Trial

Already an Insider? Log in

Discuss

  1. User avater
    LuvThreadsMagazine | | #1

    WOW!!! This is like a designer label showing us how the magic is made.

    The progress is impressive, as always.

    Senor King, looking forward to the completion of this project in 2016, and all of your upcoming creations and techniques.

  2. User avater
    kennethdking | | #2

    Thanks for the kind words! And best wishes of health and happiness to you in 2016!

  3. User avater
    sewdizzy | | #3

    Fascinating; your ambitions for exotica seem limitless! Just curious: assuming no friends stumbling on old Gladstone bags at estate sales, would there be a retail source for such a frame?

    Thank you for pushing our creative impulses into ever-new places!

  4. User avater
    VickyGrainger | | #4

    I love this bag! I make felt bags and found that good internal support for the structure (and waterproofing) has come in the form of the insides of old life jackets. There is a heavy, dense foam there that holds its shape, is easy to cut with a box cutter and waterproofs (especially on the bottom) the portion that needs structure

  5. User avater
    kennethdking | | #5

    To VickyGrainger: That's good information to know! I'll research that. Is there a certain age of life jacket, or a particular kind?

Log in or create an account to post a comment.

More From Threads

Discussion Forum

Recent Posts and Replies

  • |
  • |
  • |
  • |
  • |
  • |

Threads Insider Exclusives

View All
View All

Highlights

Shop the Store

View All
View More