Threads Logo Threads Logo Facebook Email Pinterest Twitter Instagram YouTube Icon Headphones Icon Favorite Navigation Search Icon Forum Search Icon Main Search Icon Close Icon Video Play Icon Indicator Arrow Icon Close Icon Hamburger/Search Icon Plus Icon
Insider

Sign in or become an insider to access this story

Sign In

Narrow Back Adjustment

Article Image

A garment may fit everywhere, but if vertical wrinkles form along the outer edges of the back shoulders the garment is just too wide in this section of the pattern. This adjustment narrows the back, particularly at the back of the armscye, but the hem circumference and shoulder seam remains the same.  
 
1. Draw a vertical line parallel to center back from the hem but stop at a point level to the underarm corner. Angle the line from this point to the outer third of the shoulder seam.


 

2. Draw a horizontal line from the underarm corner to the angle in the line from step 1.


 

3. Slash along both lines, leaving 1/8-inch hinges at the shoulder and underarm corner stitching lines. The vertical line is slashed through the hem.

Place a piece of tissue paper under the horizontal line. Push the underarm corner toward center back, so the vertical edges from step 1…

Start your 14-day FREE trial to access this story.

Start your FREE trial today and get instant access to this article plus access to all Threads Insider content.

Start Your Free Trial

Sign up for the Threads eletter

Get the latest including tips, techniques and special offers straight to your inbox.

Sign Up
×
Discuss

Threads Insider

Get instant access to hundreds of videos, tutorials, projects, and more.

Start Your Free Trial

Already an Insider? Log in

Subscribe to Threads today

Save up to 37% and get a free gift

Subscribe

Discuss

  1. rosie1925 | | #1

    Nice article. Would even be valuable with a picture of the "vertical wrinkles form along the outer edges of the back shoulders".

  2. User avater
    GinnyLynn | | #2

    Hallelujah! I finally know how to fix that now. LOL I have a very vivid picture in my mind of those vertical wrinkles. They've been haunting me on a jacket muslin where no matter what I did to alter the pattern it seemed to just shift the problem around. Thank you!

  3. pattyman | | #3

    how do you determine how much to remove?

  4. Astorienne | | #4

    Great article. I have the opposite problem: a wider than "normal" back. Can this alteration be used in reverse? That is, can I use the same lines & slashes, spreading instead of overlapping the vertical slash, & allowing the horizontal armhole slash to behave correspondingly? Thanks for sharing your expertise.

  5. MrsHGW | | #5

    How would this work for a short back with horizontal wrinkles?

  6. sarahcolvin | | #6

    This looks good for a narrow back - which I have, but I also have a narrow shoulder. How do I fix this too - especially on jersey fabrics using a wide front neckline??

  7. hanksews | | #7

    I have used my upper bust measurement to accommodate for narrow shoulders but still needed to do further adjustments to the back. Princess seams and back darts have made such alterations easier, but this added technique is very helpful for patterns without those features. Thanks so much.

  8. whoneedlesthis | | #8

    Louise, once again, you have just blown me away with the absolute genius and simplicity of your technique and instructions!! A full bust adjustment in reverse, for a small shoulder area, that is just brilliant. Most techniques would have ended up altering the entire back width, not good for those with hips to consider, but this technique moves only the shoulder blade fullness!
    Is there any wonder you are my favourite technique author!
    Jean Morgan

  9. User avater
    user-137240 | | #9

    There was a question about how do you know the correct amount that can be removed. You can be more accurate on a set in sleeved garment than a drop shoulder, but still some amount of vertical fulliness may be removed from this style also using the same alteration.

    For a garment with a set in sleeve, you need a sewing buddy to help measure you. Stand with your arms hanging straight against your body. The measurement is taken straight across your back from the 'crack' were your arm joins your body to the other 'crack'. In the pattern this is about where the back notch is on the armseye. You need to add an additional 1" to this measurement for movement.

    Now you have an idea of the across back width you can now adjust the pattern.

    I will try to address the additional questions you had about pattern adjusting in future blogs. They need pictures of tissue patterns and the adjustments.

    Louise Cutting

  10. User avater
    Sewingirl2000 | | #10

    My problem is that garments are usually too large at the upper back and it seems that a neck dart would take in the extra fabric. Or maybe a slight angle at the top of the center back seam. Is your article suggestion the proper or better solution to my problem? Thanks!

  11. user-2994208 | | #11

    Thank you for this! I feel like there are hoards of information on broad backs but narrow backs are ignored. This is incredibly helpful!!!!

Log in or become a member to post a comment.

More From Threads

Discussion Forum

Recent Posts and Replies

  • |
  • |
  • |
  • |
  • |
  • |

Threads Insider Exclusives

View All
View All

Highlights

  • Sign up for the Threads eletter

    Get the latest including tips, techniques and special offers straight to your inbox.

    Sign Up
  • Bernina Sponsored Content

    Where to Buy

    Locate a BERNINA store in your area.

  • Threads Insider

    Threads Insider

    Get unlimited access to Threadsmagazine.com, the online archive of past issues, member-only newsletter, and more.