Hi all! Has anyone followed the Threads articles for that? I’m thinking with the stretching, saw a lot of results here for sure. Someday I’m gonna try to make it for our sofa, like this(pic added). Where and how to start and how to estimate complexity? If you got your own similar projects, please, share it
Thanks in advance and all the best!
Threads Insider
Get instant access to hundreds of videos, tutorials, projects, and more.
Start Your Free TrialAlready an Insider? Log in
Sponsored Content
Replies
Update. Size is 88 x 44 x 36 inches approximately
Hi! There are a lot of manuals on Youtube for example, where you can find all the info. What is the approximate size of the slipcover and what is the brand of the sofa? Isn't it a Sunset - https://www.reclinerland.com/best-slipcovered-sofas/#product4 ?
Highly recommend Kim's Upholstery on YouTube.
https://www.youtube.com/channel/UCt1X_7asm1b0tDIlPc-U_bQ
I made a slipcover for my armchair and boxed cushion with zipper!
another great resource for DIY seat cushions with piping is:
SailRite - a boat upholstery vendor
https://www.youtube.com/channel/UCt1X_7asm1b0tDIlPc-U_bQ
I never thought I could do it, but it came out great - I used large drop cloths as my test from HomeDepot - when washed they are a lovely neutral gray and the price is right. I ended up keeping the muslin as my finished product since it's a casual studio chair.
https://www.homedepot.com/p/Everbilt-4-Ft-x-15-Ft-Heavy-Duty-Canvas-Drop-Cloth-41510OZ/203866037
One last resource: how to make continuous piping -
https://www.addicted2decorating.com/sewing-basics-how-to-make-continuous-bias-for-welt-cord.html
Have fun, it won't cost you much except the time to practice and absorb the techniques.
You can go to the store and buy a slipcover pattern that loosely conforms to the dimensions of your piece of furniture, but making your own pattern allows you to get your slipcover’s curves, contours, width, and length just right. Muslin is a terrific fabric for slipcover planning: https://wisereviews.com.au/best-massage-guns.html
Don't worry, it's not hard to make – I'm going to walk you through it step by step. You'll need to buy the raw cording to make it. I prefer 4/32 size, because most upholstery piping on a new couch or chair will have the thinner stuff, not big and chunky. If you want larger, go for it! https://wopick.org/
Making sure to measure your piece of furniture properly is also very important and will save you time and money from having to order more fabric or make unnecessary trips to your clients home. When you look at your piece you want to notice where the widest spot is for the section you are working on.
For an outside back and outside arms it is often the top of the cut that is your widest point. There are some pieces where the top of the outside arm extends farther back than the bottom but the lower front of the outside arm extends farther than the top and you need to make sure you are paying attention to those details when measuring. https://politicsinquotes.com/
Whether we choose to acknowledge it or not, everyone has a creative talent. Might be artistic talent, musical talent, feel for fixing things, could be anything really. How we choose to exploit this talent mostly varies from one individual to another. https://printvela.com/best-sublimation-printer-for-t-shirts/
It has been quite a long time since I made slipcovers - for an arm chair - but I remember doing it without a pattern. I took some light cloth and pinned it to the chair, trimmed it, and then traced it onto paper (so I could use the pattern in the future). Then I hand sewed the covering of the chair, using the light cloth, and I believe that was done so that, when it was turned inside out, it would fit over the chair. When I was satisfied with how it looked, I took apart the cloth and compared it to the paper pattern I had made. I made any adjustments necessary and then sewed the slipcover using the paper pattern I had made, and different, better, cloth. You better believe it was cheap fabric - this was my first attempt.
That is, loosely speaking, the 'recipe' I used, having read about how to do it in an old booklet for making slipcovers! The slipcovers looked nice, but it was just an arm chair. A sofa would be do-able. Just lots more work.
I had a friend who taught me basic sewing as an adult - she was in my church, and worked as a decorator. Once, she asked me to work with her on a big project and that involved making what seemed to be miles of welting. But it was fun! And welting is easy.
If you know someone who is an accomplished seamstress, you could pay her (as I paid my friend) to guide you through the project of making slipcovers for your sofa.
Slipcovers with piping may sound intimidating, but the process actually isn’t too difficult – even for someone who is relatively new to sewing! In a continuation of my Slipcovers and Upholstery series – today we’re going to tackle slipcovers with piping! Last year I shared a tutorial on how to make a No Pattern DIY Slipcover, and this post today actually follows a lot of the same processes, but we’ll be adding piping! https://ejustice.pk/
If you have never made one before, start with a basic one - avoid things like wingback armchairs, for example. I find it challenging to maneuver large pieces of fabric, and you may want to set your sewing machine up on a large table that can support the fabric.
Then I hand sewed the covering of the chair, using the light cloth, and I believe that was done so that, when it was turned inside out, it would fit over the chair. When I was satisfied with how it looked, I took apart the cloth and compared it to the paper pattern I had made. I made any adjustments necessary and then sewed the slipcover using the paper pattern I had made, and different, better, cloth https://ejustice.pk/corporate-lawyers/
In today’s Royal Q Trading Robot Review, we’re going to be taking a look at the platform to see if truly you can make money with their trading robot. https://www.howtologintech.com/royal-q-bot-review/
Making sure to measure your piece of furniture properly is also very important and will save you time and money from having to order more fabric or make unnecessary trips to your clients home. When you look at your piece you want to notice where the widest spot is for the section you are working on: https://sportsala.net/richest-football-defenders/
Magfed paintball is the newest variation of the sport, where players use magazines instead of loaders to feed their paintball guns.
Learn how to become a Private Investigator with Stratford's Private Investigator course online. Study at your own pace with Stratford Career Institute. https://striderpi.com/
Speaking of zippers, you’re going to need one for every cushion plus one for the base. I used 7 total, and I prefer the upholstery or industrial zippers for this application. They won’t slip or break as easily as the cheaper plastic ones. If you look at Uk49s Results your couch or chair now, it probably has a metal zipper on the cushion. Buy the longest you can, because you can always trim them down but can’t add to them. {I chose the 72 inch version.}
Hi, I am considering doing this for my sofa (the style is similar). But have never done any sort of cover before. Did you make yours in the end? And if so how did you find it?
You can visit the store and purchase a slipcover sample that loosely conforms to the dimensions of your piece of furnishings, however making your own pattern allows you to get your slipcover’s curves, contours, width, and duration simply proper. Muslin is a first rate fabric for slipcover planning: https://wisereview.com.au/best-massage-guns.html
Many years ago, I slipcovered a sectional sofa to "hide" the upholstery shredded by pet cats; About 8 years ago, I tackled reupholstering a sofa and love seat using a hardcopy manual that was bought back when the project was just an idea. Anyway, slipcovers are much easier and careful measuring will produce a custom fit. I agree that creating a muslin may seem like extra work, but will be invaluable with sorting out the sequence of sewing the components. Fabric choice is also important, and a swatch to test on your sewing machine is also worthwhile prep. Have fun!
Canvas, cotton duck, denim and twill blends are by far the most common choices for slipcovers. They are very durable and can be easily washed at home. There are many options available and these options can generally be found at your local fabric shop, not a specialty store. This also makes them a great budget-friendly option. You can also check electric taser gloves by Hinaray for more info.
It should be: Update. Size is 88 x 44 x 36 inches approximately. I have confirmed it on another website called teatime predictions