Facebook Email Pinterest Twitter X Instagram Tiktok Icon YouTube Icon Headphones Icon Favorite Navigation Search Icon Forum Search Icon Main Search Icon Close Icon Video Play Icon Indicator Arrow Icon Close Icon Hamburger/Search Icon Plus Icon Arrow Down Icon Video Guide Icon Article Guide Icon Modal Close Icon Guide Search Icon

Conversational Threads

No zig zag on back of twin needle stitches

Adriennetheartist | Posted in Creative Machine on

I am using a twin needle for the first time. The top looks fine, but check this out: no matter what I set the tension to it shows a LOT of the top threads on the back, and there is no zig zag happening with the bobbin thread. See pic (green is bobbin). Any advice would be great!




  1. Pattiann42 | | #1

    Twin Needle Stitching

    Did you have the presser foot up when threading?  If the foot was down, the top threads did not enter the tension control as this position of the foot closes the tension.  Also, try threading with one spool/thread source feeding from the spool in the opposite direction of the other; one clockwise and the other counter clockwise.

  2. Morthan | | #2

    Twin Needle

    For twin needle stitching a single layer, or any lightweight fabric (woven or stretch) - stabilise beforehand.

    For most twin needle hems, and always on stretch fabrics, stablise the stitching line before sewing,

    Your sample looks like there is an upper tension issue. 

    Most likely one thread,( probably the red) is not seated correctly between the tension discs.  It looks like the red has no tension on it which would explain why any adjustments you tried made no difference.

      On some machines, the two two threads are separated either side of a disc in the tension assembly and on others, both threads use the same chanel through the tension unit.  Always advisable to check the manual, and as already mentioned, always, always make sure the presser foot is in the up position when threading the top route.

    Lifting the presser foot also released the tension discs and lets the spread apart so the thread can be correctly seated between them.  Lowering the presser foot clamps the discs together.  The of pressue with which they clamp togeter is what creates the tension on the thread.  Different pressure = different tension.

    A helpful videoclip re twin needle stitching https://www.youtube.com/watch?v=OpOYJ8KF_q4

    It would be good to know what resolves your issue.

This post is archived.

Threads Insider

Get instant access to hundreds of videos, tutorials, projects, and more.

Start Your Free Trial

Already an Insider? Log in

Conversational Threads

Recent Posts and Replies

  • |
  • |
  • |
  • |
  • |
  • |

Threads Insider Exclusives

View All
View All