Create Intricate Fabric With Pin Weaving

Pin It

Threads Magazine, editor

212 users recommend

Create intricate fabric with pin weaving.

Jack Deutsch

Combine yarn colors, textures, and fibers for eye-catching results.

Sloan Howard

Here, a simple tote becomes an extraordinary handbag with a pin-woven inset.

Jack Deutsch

Create intricate fabric with pin weaving.

Photo: Jack Deutsch

Add Comment
Print

Place balls of yarn on the weave to test your next color choice.

6. Remove unwanted yarns. These abstract weaves often grow on their own—sometimes in surprising and delightful ways. If, however, you regret that bit you just added, remove it, and substitute something more to your liking. You can also push sections around as they freely slide on the warp threads if you want to change a curve direction.

7. Press to finish the piece. When you’ve finished weaving your design, pull out the straight pins holding the yarn tails on each side, leaving the top and bottom pin rows in place. Cover it with a press cloth, and steam-press to secure it to the fusible interfacing. The press cloth is necessary because direct contact with the iron could melt some of the yarn fibers. Remove all the pins. Press again on both sides, and your woven piece is ready to be used as you please.

Threads Magazine Subscription
$32.95 more info...

Add Comment Print

Gorgeous Wedding Gowns transformed to Heirloom Christening Gowns

Project Runway 7 - Episode 2

Comments (23)

dezzyw writes: Thanks for this post. Noro has so many beautiful threads that will work well with a design like this. I can't wait to try this technique.
Posted: 8:39 am on July 1st

maddykool writes: lyk it!!!!
Posted: 11:28 am on August 15th

SerendipityMuse writes: Love this idea! I used to weave (and spin and dye), so this is a wonderful way to renew that old "friendship" with yarns and weaving. Thanks for this!
Posted: 6:03 pm on July 9th

honor915 writes: I loved this idea - therefore, I tried the pin weaving. I also tried the June Tailor Board, which worked out perfectly.
I will using this technique on some pillars!
Posted: 7:27 pm on June 17th

FabricEnabler writes: This made me dig out my woven vest fronts that never got put together. They are just as pleasing as when I first wove them--10 years ago. Will finish the vest and do some more weaving using strange and exotic findings!
Posted: 2:34 pm on May 29th

seweasycreations writes: Fabulous! I've done this kind of weaving before but it never looked this good due to the lack of interesting yarns (due to the lack of a LYS) With the available yarns today this is going to be a fun adventure!
Posted: 1:35 am on February 3rd

EnsemblePieces writes: I had such a great time with this! Can't wait to try it with fabric strips! I had to go out and buy some yarn since I don't have the patience for knitting or crocheting and am just amazed with the results! Can't wait to make my first piece into a purse and my second into a cuff!
Posted: 3:11 pm on February 2nd

Creatingnewthings writes: I was so excited when I saw this article. I immediately shared it with our students at our new teaching facility, Artisans4Hope. We are working with African, Nepali, Bhutanese, etc. immigrants who are eager to learn new techniques so they can become self sufficient. You should have seen their eyes light up when they saw this idea! We will begin with our next class.
Posted: 10:37 pm on February 1st

Teaf5 writes: To preserve the texture, you could use a thin cotton fabric instead of iron-on interfacing as the backing if you tacked the warp threads to it after you have pinned everything to the board. You'd probably need to put a strip of tape on the board under the backing fabric first so that you wouldn't catch the board cover in the tacking stitches.

After doing the weaving, unpin the piece, pick it up gently, and machine stitch around the outside to secure all the edges more firmly. If you wanted to cut the woven piece, you'd also have to machine stitch just inside the cutting line to prevent fraying.

Thanks to the Threads editors for the interesting inspiration!


Posted: 4:54 pm on January 29th

limonene writes: @CarolfromJnO: I read that pressing on top of a folded terrycloth towel helps prevent a textured fabric from being squashed (the towel goes between the ironing board and the right side of the fabric). I've never tried it myself, but perhaps it would work in this case?
Posted: 9:04 pm on January 28th

CarolfromJnO writes: I did this yesterday. It looks cool and was lots of fun, however, I did have one issue and wondered if anyone could help. After I steamed using a press cloth all of the texture was lost. It still looks cool, but I'd rather keep the various textures. Any suggestions?
Posted: 9:52 am on January 28th

Snikwas writes: This is fabulous! Each time I come into this site I spend ages looking at all the fabulous ideas, it is so exciting!
Currently working out a design based on Winnie The Pooh (only the E H Shepard illustrations - not the Disney versions which I really dislike)for my first crib quilt.
Posted: 2:23 am on January 28th

ForeverSewing writes: Very nice. Any chance you can tell us the purse pattern information?
Posted: 11:01 pm on January 26th

peej2 writes: Swell, another "must do" project.
I lost my job about 3 months ago, and have been VERY busy knitting, crocheting, sewing, macraming,etc. I'm loving every minute of it. There just don't seem to be enough hours in the day to do all the projects I have lined up. I mean, I have to get to my tatting, quilling, beadwork, etc.
I just don't have time to get a job. Unfortunately, since I support myself and my two sons . . . I will have to . . . eventually. 8-)
Posted: 12:50 pm on January 26th

maltesemamma writes: I have been making woven necklaces using the same techniques. I also use various beads and charms to decorate the necklaces and they make one of a kind gifts. The necklaces can be made to match outfits or to add a punch to your wardrobe. I have also experiented with using felting and making these into woven cuff bracelets.

As always I am a great fan of Threads and will use this idea in my one of kind jackets.
Posted: 10:56 am on January 26th

CarolfromJnO writes: I seem to recall Threads doing a feature on this MANY years ago. I think it was a cover story with a vest and it may have been with ribbons. It was beautiful. I have recently begun knitting and can't wait to try this method using all of those left over pieces of yarn. I now realize the necessity of creating "leftovers" on purpose!! Can't wait to try this!
Thanks.
Posted: 10:16 am on January 26th

QuiltinFool writes: I did something very similar to this in Sisters, Oregon. At one of the Stitchin Posts annual outdoor quilt shows. The week before the show they do what they call the Quilters Affair. Since I have run into friends from around the world, I'm sure many of you have heard of it even if you haven't had the pleasure of being there.
We used foam core board, pearl cotton thread and bias strips of fabric. We made vests from our "fabric". It was really fun, but I like the different media used in this idea. I'll have to try it sometime.

Posted: 11:35 pm on January 25th

clothingeng writes: This is very interesting...a project that I will try for sure.
Posted: 8:56 pm on January 25th

MMinND writes: A great backboard I've used is foam core board that is available at office and art supply stores in 1/4 and 1/2 inch thicknesses. Two pieces of 1/4 inch can be glued together for a lightweight, non bending stable base that the pins will slip into easily.
Posted: 8:10 pm on January 25th

trishapat writes: This is gorgeous. The textural possibilities it offers are great. I am intrigued at the prospect of using up fabric scraps by just cutting them on the bias and using them instead of yarns. I have such a hard time throwing away scraps of beautiful fabrics and this really may give me a good way to use them up.
Posted: 7:13 pm on January 25th

woolbrain writes: I love this project and I can't wait to try it. I did something similar many years ago. My friend and I used to watch Shirley Adams on the t.v she had a great sewing show !

Thanks threads:)

woolbrain.wordpress.com
Posted: 6:56 pm on January 25th

sews4fun writes: I LOVE this idea! I can't wait to try it!
Posted: 6:35 pm on January 25th

Clothdog writes: I tried this, but instead of using a homemade cardboard base, I used a "Cushioned Quilter's Square 'n' Blocker" from June Tailor that I had lying around anyway. (This is just a big padded rectangle covered with canvas that is ruled in various ways to help line up quilt blocks and such.) I just lay the interfacing right on it and then set up the pins and pearl cotton as described. The give in the padding was really handy for the edges, where my weaving got a little snug. In fact, it was indispensable. A fun project that can take as much or as little time as you want, and the results are pretty cool.
Posted: 5:56 pm on January 25th

You must be logged in to post comments. Click here to login.