The Circular Ribbon Flower
comments (21) March 8th, 2010 in sewing, design, fabric, embellishmentsThis fabric flower is one I found in an old text I had, and I decided to try it--the instructions in the text were, shall we say, lacking. It can be made from ribbon, or from a strip of fabric. If you choose the fabric strip, you'll have to finish the edges.
First, a definition: Ribbon width as unit of measure. Candice Kling, in her excellent book The Artful Ribbon, came up with the idea of using the width of the ribbon, as the unit of measure, when demonstrating her techniques. This is an excellent idea, which enables you to create any of her pieces in the book in any scale you desire. I will use the ribbon width as unit of measure here as well.
For this demonstration to photograph well, I've decided to cut a strip of taffeta, 3" wide. The length of this strip is 6 ribbon widths, or 18" long.
![]() |
So, the formula: This flower requires six ribbon widths' worth of ribbon to make. You can choose any width ribbon you wish. |
Along one edge, mark ribbon widths on the BACK side of the ribbon. This will divide the ribbon into 6 sections, approximately one ribbon width square each.
![]() |
In our example, the marks are 3" apart. |
![]() |
Now, press creases across the ribbon on the marks you just made, forming 5 creases. The fabric is wrong-side up in this photo. |

















Comments (21)
I just finished making some larger satin evening clutches and this type of flower would be perfect on some of them.
Thank you for 're-discovering' this technique. I wish my mom had kept all of her old sewing magazines!!
Posted: 8:15 pm on January 17th
Posted: 12:01 am on September 26th
Posted: 10:19 pm on August 25th
Posted: 10:46 am on July 14th
Posted: 7:21 am on June 8th
Posted: 5:33 pm on May 23rd
always the best ideas. Thank you.
Posted: 10:45 pm on April 24th
Posted: 10:17 am on March 16th
Well, despite the fact that the strip was a bit wonky due to the fact that the material was sliding about everywhere when I tried to cut it(the downside of that material)the flower was GORGEOUS, and ridiculously EASY. I found a blanket stitch worked better than a whipstitch and curbed fraying better. One long edge had the selvage on it, which made an attractive outer edge on the flower. The inside edge displayed a tendency to want to pop out of the middle. One might want to "finish" both long edges before commencing to make this flower, depending on the material and the kind of wear it is likely to be subjected to.
Also, if you wanted to make it into a cuff for a blouse, the inside edge can be "box-pleated" and stitched to the inside circle; it "opens" the centre of the flower up some, and prevents the centre from everting itself. The design is only minimally affected, and not for the worse, as far as I can tell. Thabnk you for this clever idea, Mr. King!
Posted: 12:37 am on March 16th
Posted: 10:50 pm on March 10th
Posted: 8:57 am on March 10th
Posted: 8:47 am on March 10th
Posted: 9:48 pm on March 9th
Thank you for sharing a wonderful flower.
Posted: 11:56 am on March 9th
Posted: 10:27 am on March 9th
Posted: 10:15 am on March 9th
Janey
Posted: 9:30 am on March 9th
Posted: 8:01 am on March 9th
Posted: 11:16 pm on March 8th
Posted: 7:24 pm on March 8th
Posted: 7:08 pm on March 8th
You must be logged in to post comments. Click here to login.